Difference between revisions of "AUTO21TELEROBOTUSB"

From IntRoLab
Line 15: Line 15:
  
  
 
+
= STARTUP PROCEDURE =  
= PROCEDURE =  
 
  
  
Line 24: Line 23:
 
## The F1-F12 key is variable and depends on the BIOS and computer model
 
## The F1-F12 key is variable and depends on the BIOS and computer model
 
# Start the system from the USB key provided by IntRoLab.
 
# Start the system from the USB key provided by IntRoLab.
## This can take 1-2 minutes until you are in the desktop
+
## Wait 1-2 minutes until you are in the desktop
# Y
+
# Make sure you have access to the Internet. You can try browsing the web with Firefox to test.
 +
# Connect to the IntRoLab VPN
 +
# Make sure the TeleRobot is ready in IntRoLab's lab (Give us a call!)
 +
# Click on the TeleRobot Icon
 +
## Wait until you see the remote camera's image
 +
# Control the point of view with the joystick buttons and the Option Menu
 +
# Control the robot with the analog sticks
 +
 
 +
= SHUTDOWN PROCEDURE =

Revision as of 14:19, 8 October 2010

REQUIREMENTS

  • Computer with 2 USB Ports, Core 2 Duo processor or faster
  • NVidia graphics chip
  • Internet connection

PROVIDED BY INTROLAB

  • 8 GB USB Key "DataTRaveler 102"
  • Logitech USB joystick

AUTO21USBKey.jpg AUTO21USBJoystick.jpg


Note : This procedure is not compatible with Apple Macs or Macbooks. 


STARTUP PROCEDURE

  1. Connect the USB Key "DataTraveler 102" and the Logitech joystick to the USB ports.
  2. Make sure your BIOS (System Startup program) can boot from the USB key.
    1. Most of the time you can select the startup disks in the BIOS configuration utility of directly by pressing the F1-F12 key when starting the computer.
    2. The F1-F12 key is variable and depends on the BIOS and computer model
  3. Start the system from the USB key provided by IntRoLab.
    1. Wait 1-2 minutes until you are in the desktop
  4. Make sure you have access to the Internet. You can try browsing the web with Firefox to test.
  5. Connect to the IntRoLab VPN
  6. Make sure the TeleRobot is ready in IntRoLab's lab (Give us a call!)
  7. Click on the TeleRobot Icon
    1. Wait until you see the remote camera's image
  8. Control the point of view with the joystick buttons and the Option Menu
  9. Control the robot with the analog sticks

SHUTDOWN PROCEDURE