Difference between revisions of "RoballRFDocumentation"
From IntRoLab
(→Changing the Audio Setup) |
(→Changing the Audio Setup) |
||
Line 31: | Line 31: | ||
= Changing the Audio Setup = | = Changing the Audio Setup = | ||
− | # Connect the audio cable from your computer to Roball's audio jack. You need a cable with 1/8 male audio jacks (the one that connects to the phone jack of your computer) [[Image:RoballAudioSetupConnectCable.png | 640px | center]] | + | # Connect the audio cable from your computer to Roball's audio jack. You need a cable with 1/8" male audio jacks (the one that connects to the phone jack of your computer) [[Image:RoballAudioSetupConnectCable.png | 640px | center]] |
# Start the Roball-RF GUI and connect to the robot. | # Start the Roball-RF GUI and connect to the robot. | ||
# In the application menu, click on Config->Audio Setup You should see the following dialog: [[Image:RoballAudioSetupEmpty.png | 640px | center]] | # In the application menu, click on Config->Audio Setup You should see the following dialog: [[Image:RoballAudioSetupEmpty.png | 640px | center]] |
Revision as of 19:04, 12 June 2009
Contents
Roball RF Documentation
Under construction. Coming soon...
Connecting to Roball
When connected:
Operating the robot
Virtual Joystick
Activating Behaviors Manually
Starting Pre-Programmed Mode
Logging data
Saving to a log file
Clearing the Displayed Log
Changing the Audio Setup
- Connect the audio cable from your computer to Roball's audio jack. You need a cable with 1/8" male audio jacks (the one that connects to the phone jack of your computer)
- Start the Roball-RF GUI and connect to the robot.
- In the application menu, click on Config->Audio Setup You should see the following dialog:
- Create a text file containing the list of audio files you want to use with Roball. Here is an example of configuration File:AudioSetup.txt. Use absolute path names for files. Audio files must be of type WAV, MP3 or AAC depending on your installation.
- Click on the "Load List" button and select the text file containing the file list. The dialog should now look like this :
- Make sure your volume is high enough.
- Click on the "Record" button. This will play audio files to the robot and send commands to Roball to record them in its internal audio memory.
- Verify if the record worked by selecting any file on the list and clicking on the "Play" button. The audio should come out of Roball's speaker.
Note : Audio configuration will be kept in Roball's memory, even after powering Roball down.