RoballRFDocumentation
From IntRoLab
Revision as of 18:48, 12 June 2009 by Dominic Létourneau (talk | contribs) (→Changing the Audio Setup)
Contents
Roball RF Documentation
Coming soon...
Connecting to Roball
When connected:
Operating the robot
Virtual Joystick
Activating Behaviors Manually
Starting Pre-Programmed Mode
Logging data
Saving to a log file
Clearing the Displayed Log
Changing the Audio Setup
- Connect the audio cable from your computer to Roball's audio jack.
- Start the Roball-RF GUI and connect to the robot.
- In the application menu, click on Config->Audio Setup You should see the following dialog:
